Administrative screen for the WatchMon supervisor hardware, and how to understand the various fields available to configure the thermal (heating /cooling) control logic.
This screen is accessed via the Control Logic option on the Menu, then choosing the Thermal tab. Editing only available when in Technician mode.
operating mode for the cooling control logic.
3
Cell temperature threshold that is OK to operate, if above will start the cooling control when monitoring is enabled.
WatchMon supervisor temperature threshold that is OK to operate, if above will start the cooling control when monitoring is enabled.
When monitoring is enabled will start the cooling control if any cellmon modules goes into bypass.
Operating mode for the heating control logic.
Cell temperature threshold that is OK to operate, if below will start the heating control when monitoring is enabled.
WatchMon supervisor temperature threshold that is OK to operate, if below will start the heating control when monitoring is enabled.
Ensures that the state change from ON to OFF must exceed beyond the period specified in seconds.
Ensures that the state change from OFF to ON must exceed beyond the period specified in seconds.
Flashes as status telemetry is received (hover over will display time received).
Flashes when setup configuration is received (hover over will display time received).
This button opens fields to editing, only available when in Technician mode.
Restores values to last saved values and returns to read only mode.
Saves values into system and return to read only mode. This only works when connected by a USB. If saving whilst connected via WiFi the following Error message appears.
Restore values to default.
Allows editing of more advanced fields.
Pressing this button calls up the knowledge base on this screen.