¶ Lifetime Telemetry
Administrative screen for the WatchMon supervisor hardware, and how to understand the various fields available to read the telemetry information over the WatchMon supervisor hardware's lifetime.
This screen is accessed via the Telemetry option on the Menu, then choosing the Lifetime tab.
¶ Objective
Review the total number of occurrences and the recent times when control states change from ON to OFF, etc.. The page is sorted into areas corresponding to different screens.
¶ Field Definitions
-
¶ Critical BAttOK - count
Total number of events when the Critical BattOK is enabled.
-
¶ Critical BattOK - ON time
Most recent time when critical BattOK control was enabled.
-
¶ Critical BattOK - OFF time
Most recent time when critical BattOK control was disabled.
-
¶ Charge On - count
Total number of events when charge high power control is enabled.
-
¶ Charge On - ON time
Most recent time when charge control was enabled.
-
¶ Charge On - OFF time
Most recent time when charge control was disabled.
-
¶ Charge LimPower - count
Total number of events when charge low/limited power control is enabled.
-
¶ Charge LimPower - ON time
Most recent time when charge control was switched to low/limited power.
-
¶ Alt On - count
Total number of events when alt charge is enabled.
-
¶ Alt On - ON time
Most recent time when alt charge control was enabled.
-
¶ Alt On - OFF time
Most recent time when alt charge control was disabled.
-
¶ Discharge ON - count
Total number of events when the discharge high power control is enabled.
-
¶ Discharge ON - Recent ON time
Most recent time when control was enabled.
-
¶ Discharge ON - Recent OFF time
Most recent time when control was disabled.
-
¶ Discharge LimPower - count
Total number of events when Discharge low/limited power control is enabled.
-
¶ Discharge LimPower - ON time
Most recent time when discharge control was switched to low/limited power.
-
¶ Alt On - count
Total number of events when alt discharge is enabled.
-
¶ Alt On - ON time
Most recent time when alt discharge control was enabled.
-
¶ Alt On - OFF time
Most recent time when alt discharge control was disabled.
-
¶ Thermal Heat On - count
Total number of events when thermal heating control is enabled.
-
¶ Thermal Heat On - ON time
Most recent time when thermal heating control was enabled.
-
¶ Thermal Heat On - OFF time
Most recent time when thermal heating control was disabled.
-
¶ Thermal Cool On - count
Total number of events when thermal cooling control is enabled.
-
¶ Thermal Cool On - ON time
Most recent time when thermal cooling control was enabled.
-
¶ Thermal Cool On - OFF time
Most recent time when thermal cooling control was disabled.
-
¶ Rule 1 - count
Total number of events when charge high power control is enabled.
-
¶ Rule 1 On - ON time
Most recent time when charge control was enabled.
-
¶ Rule 1 On - OFF time
Most recent time when charge control was disabled.
-
¶ Rule 2 On - count
Total number of events when charge high power control is enabled.
-
¶ Rule 2 On - ON time
Most recent time when charge control was enabled.
-
¶ Rule 2 On - OFF time
Most recent time when charge control was disabled.
-
¶ Rule 3 On - count
Total number of events when charge high power control is enabled.
-
¶ Rule 3 On - ON time
Most recent time when charge control was enabled.
-
¶ Rule 3 On - OFF time
Most recent time when charge control was disabled.
-
¶ Rule 4 On - count
Total number of events when charge high power control is enabled.
-
¶ Rule 4 On - ON time
Most recent time when charge control was enabled.
-
¶ Rule 4 On - OFF time
Most recent time when charge control was disabled.
-
¶ Startup
Time stamp of most recent startup
-
¶ First Sync
Time stamp of first Sync Data
-
¶ Wizard
Time stamp of most recent time Wizard was run.
-
¶ Count Startup
Total number of events when the system has been started / powered.
-
¶ Count Daily Sessions
Total number of daily session recorded.
-
¶ Count SoC% Total cycles
total number of cycles where the battery SoC% state of charge has cycled from full to empty and returned to full threshold.
-
¶ Initial Bypass
Time when cell first went into bypass for the first time on the day.
-
¶ Bypass Completed
Time when all CellMons achieved final bypass for the day.
-
¶ Bypass Extra
Most recent partial bypass
-
¶ Bypass Test
Time when last Bypass Test was completed.
-
¶ Bypass Outcome
Outcome of last Bypass test. If never tested will show 'Not Tested'
-
¶ SoC% Empty state
Most recent time when the state of charge went below the empty threshold.
-
¶ SoC% Full state
Most recent time when the state of charge went above the full threshold.
-
¶ SoC% Re-Cal Empty
Most recent time when the state of charge triggered a recalibration event on empty.
-
¶ SoC% Re-Cal Full
Most recent time when the state of charge triggered a recalibration event on full.
