Administrative screen providing telemetry for the WatchMon supervisor hardware, and how to understand the various fields shown for the live WatchMon supervisor hardware.
This screen is accessed via the Telemetry option on the Menu, then choosing the Live Statistics tab.
Used as a diagnostic screen to look at all the key statistics and functions across the entire systems.
Minimum, Maximum and Average Voltage over the cells.
Minimum, Maximum and Average Temperature over the cells.
Minimum and Maximum Temperature of the Bypass function.
Minimum and Maximum current of the Bypass function.
mAh range for bypass session.
Status light for Run/Idle.
Status light for Charge/Normal.
Number of cells in Bypass during session and Initial and Final number in bypass.
Target number according to the system configuration.
Total number of CellMon modules that have not responded in a timely period.
Current supply voltage to the WatchMon.
Current temperature from the sensor in the WatchMon.
Total consumption for both charge or discharge.
Running average consumption over 5 minutes for charge or discharge.
Calculated capacity with reference to nominal capacity.
Estimated time remaining if the recent consumption continues to respective full/empty.
Current reading from shunt.
Current reading from shunt.
Current SoC% reading from the shunt.
Current Temperature from the shunt.
Status light for Critical Battery OK.
Status light for Charging.
Status light for Discharge.
Status light for Heating Required.
Status light for Cooling Required.
Pressing this button calls up the knowledge base on this screen.