¶ Connecting to a WatchMon
WatchMon will most likely automatically connect via USB when the WatchMon is first plugged in if the software is open and the USB driver is installed.
However, if this doesn't occur you can fix by clicking Connect on your setup checklist.
¶ Click the USB Icon in Setup Checklist.
¶ Check the Icon Status
-
¶ USB Connection
USB icon will be displayed if WatchMon is connected using USB.
-
¶ WiFi Connection
WiFi Icon will be displayed if WatchMon is connected using WiFi.
¶ Connection Screen
Choose USB as Method and your system should appear.
¶ Troubleshooting
- USB Connection Not Establised - Try to manually change the Comm Port.
- If USB does not work, try USB Legacy. If your WatchMon shows up then the firmware needs updating as it is out of sync with the software.