¶ TempView
Administrative screen for the WatchMon supervisor hardware providing a summary, and how to understand and see the various fields available to configure the Temperature aspect of control logic.
This screen is accessed via the Control Logic option on the Menu, then choosing the TempView tab. Editing only available when in Technician mode.
¶ Field Definitions
-
¶ Thermal Readings - CellMon
-
¶ Live Readings
Values read from device.
-
¶ Critical High (CT9)
Cell temperature threshold that is OK to operate, if above will change state when monitoring is enabled, output is connected to the Critical Contactor.
-
¶ CMU Alert High (CT8)
Cell temperature warning when above will flash RED led on CellMon.
-
¶ Discharge High (CT7)
Cell temperature threshold that is OK to operate, if above will stop the discharging state when monitoring is enabled.
-
¶ Charge High (CT6)
Cell temperature threshold that is OK to operate, if above will stop the charging when monitoring is enabled.
-
¶ Cool (CT5)
Cell temperature threshold that is OK to operate, if above will start the cooling control when monitoring is enabled.
-
¶ Heat (CT4)
Cell temperature threshold that is OK to operate, if below will start the heating control when monitoring is enabled.
-
¶ Charge Low (CT3)
Cell temperature threshold that is OK to operate charging, if below will stop the charging when monitoring is enabled.
-
¶ Discharge Low (CT2)
Cell temperature threshold that is OK to operate, if below will stop the discharging state when monitoring is enabled.
-
¶ Critical Low (CT1)
Cell temperature threshold that is OK to operate, if below will change state when monitoring is enabled, output is connected to the Critical Contactor.
-
-
¶ Thermal Readings - Ambient
-
¶ Live Readings
-
¶ Critical High (BT9)
WatchMon supervisor temperature threshold that is OK to operate, if above will change state when monitoring is enabled, output is connected to the Critical Contactor.
-
¶ Discharge High (BT7)
WatchMon supervisor temperature threshold that is OK to operate, if above will stop the discharging state when monitoring is enabled.
-
¶ Charge High (BT6)
WatchMon supervisor temperature threshold that is OK to operate, if above will stop the charging when monitoring is enabled.
-
¶ Cool (BT5)
WatchMon supervisor temperature threshold that is OK to operate, if above will start the cooling control when monitoring is enabled.
-
¶ Heat (BT4)
WatchMon supervisor temperature threshold that is OK to operate, if below will start the heating control when monitoring is enabled.
-
¶ Charge Low (BT3)
WatchMon supervisor temperature threshold that is OK to operate, if below will stop the charging when monitoring is enabled.
-
¶ Discharge Low (BT2)
WatchMon supervisor temperature threshold that is OK to operate, if below will stop the discharging state when monitoring is enabled.
-
¶ Critical Low (BT1)
WatchMon supervisor temperature threshold that is OK to operate, if below will change state when monitoring is enabled, output is connected to the Critical Contactor.
-
-
¶ Support Tip
Pressing this button calls up the knowledge base on this screen.
¶ Troubleshooting
If figures shown on this page need changing, please go to the following links to change the designated items:
-
Hardware CellMon: CT8
-
Control Logic - Critical Battery OK: CT1, CT9, BT1, BT9
-
Control Logic - Charging Settings: CT3, CT6, BT3, BT6
-
Control Logic - Discharging Settings: CT2, CT7, BT2, BT7
-
Control Logic - Thermal Settings: CT4, CT5, BT4, BT5