¶
How-To Guide
Articles to help set up or configure the WatchMon:
¶
WatchMonCORE Hardware
Set the initial SoC%
Wiring a Contactor
Wiring Diagram for Multiple CellMate-K9
Identify a specific CellMon using the LED
Connect the ShuntMon to the WatchMon Supervisor
Connect a Fan to Expansion Board
Connect a Positive Switch Latching Contactor to Expansion Board
Install Multiple Battery Banks and Cell Monitors on the Same WatchMon
Connect Cell Monitors to OEM Batteries With a Shared Balancing Wires Harness
Device Sync CellMons with the WatchMon Hardware
Connect Directly to WatchMon WiFi
Connect BlockMons - Battery Pack chain
¶
WatchMon Toolkit Software
Verify Whether the Software is the Latest Release
Customise the Theme/Style of WatchMon Toolkit
Connect to WatchMon via WiFi Access Point
Web Access Provisioning
Locate and Modify Pin Code
Bypass Tests
Restore to an Earlier Toolkit
Upgrade the Software to Preview
Enable Software & Firmware Beta Tester Option
Test the CMU Network for Faults with a WatchMon
Set Up The AutoLevel Bypass Configuration On The WatchMon
¶
Inverter / Charger
Wiring a circuit breaker
How to control an SMA Sunny Island inverter/charger with a WatchMon
The full list of compatible inverters can be found on the
Integration page.
Inverter Testing